리눅스 서버 재부팅 현상

갑자기 리눅스가 아무 이유 없이 재부팅 되었습니다.

계속 돌아가야 하는 서버 이기 때문에 문제 되는 부분을 찾아야 하는데 아직 초보라...

제가 확인하기엔 무리가 있어서 질문란에 올립니다.

 

May 10 04:02:01 test1 syslogd 1.4.1: restart.

May 11 21:44:29 test1 syslogd 1.4.1: restart.

May 11 21:44:29 test1 syslog: syslogd startup succeeded

May 11 21:44:29 test1 kernel: klogd 1.4.1, log source = /proc/kmsg started.

May 11 21:44:29 test1 kernel: Linux version 2.4.26 (root@test1) (gcc version 3.2

.2 20030222 (Red Hat Linux 3.2.2-5)) #3 SMP Fri Aug 6 10:15:09 KST 2004

May 11 21:44:29 test1 kernel: BIOS-provided physical RAM map:

May 11 21:44:29 test1 kernel: BIOS-e820: 0000000000000000 - 000000000009ac00 (u

sable)

May 11 21:44:29 test1 kernel: BIOS-e820: 000000000009ac00 - 00000000000a0000 (r

eserved)

May 11 21:44:29 test1 kernel: BIOS-e820: 00000000000e8000 - 0000000000100000 (r

eserved)

May 11 21:44:29 test1 kernel: BIOS-e820: 0000000000100000 - 00000000efff0000 (u

sable)

May 11 21:44:29 test1 kernel: BIOS-e820: 00000000efff0000 - 00000000effff000 (A

CPI data)

May 11 21:44:29 test1 kernel: BIOS-e820: 00000000effff000 - 00000000f0000000 (A

CPI NVS)

May 11 21:44:29 test1 kernel: BIOS-e820: 00000000fec00000 - 00000000fed00400 (r

eserved)

May 11 21:44:29 test1 kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (r

eserved)

May 11 21:44:29 test1 kernel: BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)

May 11 21:44:29 test1 syslog: klogd startup succeeded

May 11 21:44:29 test1 kernel: BIOS-e820: 0000000100000000 - 0000000110000000 (usable)

May 11 21:44:29 test1 kernel: Warning only 4GB will be used.

May 11 21:44:29 test1 kernel: Use a PAE enabled kernel.

May 11 21:44:29 test1 kernel: 3200MB HIGHMEM available.

May 11 21:44:29 test1 insmod: insmod: paep: no module by that name found

May 11 21:44:29 test1 kernel: 896MB LOWMEM available.

May 11 21:44:29 test1 aep1000: Loading paep module failed

May 11 21:44:29 test1 kernel: found SMP MP-table at 000ff780

May 11 21:44:29 test1 kernel: hm, page 000ff000 reserved twice.

May 11 21:44:29 test1 kernel: hm, page 00100000 reserved twice.

May 11 21:44:29 test1 kernel: hm, page 000f1000 reserved twice.

May 11 21:44:29 test1 kernel: hm, page 000f2000 reserved twice.

May 11 21:44:29 test1 kernel: On node 0 totalpages: 1048576

May 11 21:44:29 test1 kernel: zone(0): 4096 pages.

May 11 21:44:29 test1 kernel: zone(1): 225280 pages.

May 11 21:44:29 test1 kernel: zone(2): 819200 pages.

May 11 21:44:29 test1 kernel: ACPI: RSDP (v000 INTEL ) @ 0x000ff9b0

May 11 21:44:29 test1 kernel: ACPI: RSDT (v001 INTEL SWV25 0x00000001 MSFT 0x01000000) @ 0xefff0000

May 11 21:44:29 test1 kernel: ACPI: FADT (v001 INTEL SWV25 0x00000001 MSFT 0x01000000) @ 0xefff0030

May 11 21:44:29 test1 kernel: ACPI: MADT (v001 INTEL SWV25 0x00000001 MSFT 0x01000000) @ 0xefff00b0

May 11 21:44:29 test1 kernel: ACPI: OEMR (v001 INTEL SWV25 0x00000001 MSFT 0x01000000) @ 0xefff0140

May 11 21:44:29 test1 kernel: ACPI: DSDT (v001 INTEL SWV25 0x00000100 INTL 0x20020918) @ 0x00000000

May 11 21:44:29 test1 kernel: ACPI: Local APIC address 0xfee00000

May 11 21:44:29 test1 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

May 11 21:44:29 test1 kernel: Processor #0 Pentium 4(tm) XEON(tm) APIC version 20

May 11 21:44:29 test1 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)

May 11 21:44:29 test1 kernel: Processor #6 Pentium 4(tm) XEON(tm) APIC version 20

May 11 21:44:29 test1 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)

May 11 21:44:29 test1 kernel: Processor #1 Pentium 4(tm) XEON(tm) APIC version 20

May 11 21:44:29 test1 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)

May 11 21:44:29 test1 kernel: Processor #7 Pentium 4(tm) XEON(tm) APIC version 20

May 11 21:44:29 test1 kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])

May 11 21:44:29 test1 kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])

May 11 21:44:29 test1 kernel: Using ACPI for processor (LAPIC) configuration information

May 11 21:44:29 test1 kernel: Intel MultiProcessor Specification v1.4

May 11 21:44:29 test1 kernel: Virtual Wire compatibility mode.

May 11 21:44:29 test1 kernel: OEM ID: INTEL Product ID: SWV25 APIC at: 0xFEE00000

May 11 21:44:29 test1 kernel: I/O APIC #8 Version 32 at 0xFEC00000.

May 11 21:44:29 test1 kernel: I/O APIC #9 Version 32 at 0xFEC81000.

May 11 21:44:29 test1 kernel: I/O APIC #10 Version 32 at 0xFEC81400.

May 11 21:44:29 test1 kernel: Enabling APIC mode: Flat.^IUsing 3 I/O APICs

May 11 21:44:29 test1 kernel: Processors: 4

May 11 21:44:29 test1 kernel: Kernel command line: auto BOOT_IMAGE=linux ro root=803 BOOT_FILE=/boot/vmlinuz

May 11 21:44:29 test1 kernel: Initializing CPU#0

May 11 21:44:29 test1 kernel: Detected 3189.802 MHz processor.

May 11 21:44:29 test1 kernel: Console: colour VGA+ 80x25

May 11 21:44:29 test1 kernel: Calibrating delay loop... 6370.09 BogoMIPS

May 11 21:44:29 test1 kernel: Memory: 3879664k/4194304k available (1555k kernel code, 52024k reserved, 336k data, 280k init, 3014592k highmem)

May 11 21:44:29 test1 kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)

May 11 21:44:29 test1 kernel: Inode cache hash table entries: 262144 (order: 9, 2097152 bytes)

May 11 21:44:29 test1 kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)

May 11 21:44:29 test1 kernel: Buffer cache hash table entries: 262144 (order: 8, 1048576 bytes)

May 11 21:44:29 test1 kernel: Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)

May 11 21:44:29 test1 kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K

May 11 21:44:29 test1 kernel: CPU: L2 cache: 512K

May 11 21:44:29 test1 kernel: CPU: L3 cache: 1024K

May 11 21:44:29 test1 kernel: CPU: Physical Processor ID: 0

May 11 21:44:29 test1 kernel: Intel machine check architecture supported.

May 11 21:44:29 test1 kernel: Intel machine check reporting enabled on CPU#0.

May 11 21:44:29 test1 kernel: Enabling fast FPU save and restore... done.

May 11 21:44:29 test1 kernel: Enabling unmasked SIMD FPU exception support... done.

May 11 21:44:29 test1 kernel: Checking 'hlt' instruction... OK.

May 11 21:44:29 test1 kernel: POSIX conformance testing by UNIFIX

May 11 21:44:29 test1 kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)

May 11 21:44:29 test1 kernel: mtrr: detected mtrr type: Intel

May 11 21:44:29 test1 kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K

May 11 21:44:29 test1 kernel: CPU: L2 cache: 512K

May 11 21:44:29 test1 kernel: CPU: L3 cache: 1024K

May 11 21:44:29 test1 kernel: CPU: Physical Processor ID: 0

May 11 21:44:29 test1 kernel: Intel machine check reporting enabled on CPU#0.

May 11 21:44:29 test1 kernel: CPU0: Intel(R) Xeon(TM) CPU 3.20GHz stepping 05

May 11 21:44:29 test1 kernel: per-CPU timeslice cutoff: 1463.20 usecs.

May 11 21:44:29 test1 kernel: enabled ExtINT on CPU#0

May 11 21:44:29 test1 kernel: ESR value before enabling vector: 00000000

May 11 21:44:29 test1 kernel: ESR value after enabling vector: 00000000

May 11 21:44:29 test1 kernel: Booting processor 1/1 eip 2000

May 11 21:44:29 test1 kernel: Initializing CPU#1

May 11 21:44:29 test1 kernel: masked ExtINT on CPU#1

May 11 21:44:29 test1 kernel: ESR value before enabling vector: 00000000

May 11 21:44:29 test1 kernel: ESR value after enabling vector: 00000000

May 11 21:44:29 test1 kernel: Calibrating delay loop... 6370.09 BogoMIPS

May 11 21:44:29 test1 kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K

May 11 21:44:29 test1 kernel: CPU: L2 cache: 512K

May 11 21:44:29 test1 kernel: CPU: L3 cache: 1024K

May 11 21:44:29 test1 kernel: CPU: Physical Processor ID: 0

May 11 21:44:29 test1 kernel: Intel machine check reporting enabled on CPU#1.

May 11 21:44:29 test1 kernel: CPU1: Intel(R) Xeon(TM) CPU 3.20GHz stepping 05

May 11 21:44:29 test1 kernel: Booting processor 2/6 eip 2000

May 11 21:44:29 test1 kernel: Initializing CPU#2

May 11 21:44:29 test1 kernel: masked ExtINT on CPU#2

May 11 21:44:29 test1 kernel: ESR value before enabling vector: 00000000

May 11 21:44:29 test1 kernel: ESR value after enabling vector: 00000000

May 11 21:44:29 test1 kernel: Calibrating delay loop... 6370.09 BogoMIPS

May 11 21:44:29 test1 kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K

May 11 21:44:29 test1 kernel: CPU: L2 cache: 512K

May 11 21:44:29 test1 kernel: CPU: L3 cache: 1024K

May 11 21:44:29 test1 kernel: CPU: Physical Processor ID: 3

May 11 21:44:29 test1 kernel: Intel machine check reporting enabled on CPU#2.

May 11 21:44:30 test1 kernel: CPU2: Intel(R) Xeon(TM) CPU 3.20GHz stepping 05

May 11 21:44:30 test1 kernel: Booting processor 3/7 eip 2000

May 11 21:44:30 test1 kernel: Initializing CPU#3

May 11 21:44:30 test1 kernel: masked ExtINT on CPU#3

May 11 21:44:30 test1 kernel: ESR value before enabling vector: 00000000

May 11 21:44:30 test1 kernel: ESR value after enabling vector: 00000000

May 11 21:44:30 test1 kernel: Calibrating delay loop... 6370.09 BogoMIPS

May 11 21:44:30 test1 kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K

May 11 21:44:29 test1 kernel: CPU: L2 cache: 512K

May 11 21:44:29 test1 kernel: CPU: L3 cache: 1024K

May 11 21:44:29 test1 kernel: CPU: Physical Processor ID: 3

May 11 21:44:29 test1 kernel: Intel machine check reporting enabled on CPU#2.

May 11 21:44:30 test1 kernel: CPU2: Intel(R) Xeon(TM) CPU 3.20GHz stepping 05

May 11 21:44:30 test1 kernel: Booting processor 3/7 eip 2000

May 11 21:44:30 test1 kernel: Initializing CPU#3

May 11 21:44:30 test1 kernel: masked ExtINT on CPU#3

May 11 21:44:30 test1 kernel: ESR value before enabling vector: 00000000

May 11 21:44:30 test1 kernel: ESR value after enabling vector: 00000000

May 11 21:44:30 test1 kernel: Calibrating delay loop... 6370.09 BogoMIPS

May 11 21:44:30 test1 kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K

May 11 21:44:30 test1 kernel: CPU: L2 cache: 512K

May 11 21:44:30 test1 kernel: CPU: L3 cache: 1024K

May 11 21:44:30 test1 xinetd[964]: xinetd Version 2.3.10 started with libwrap options compiled in.

May 11 21:44:30 test1 kernel: CPU: Physical Processor ID: 3

May 11 21:44:30 test1 xinetd[964]: Started working: 1 available service

May 11 21:44:30 test1 kernel: Intel machine check reporting enabled on CPU#3.

May 11 21:44:30 test1 kernel: CPU3: Intel(R) Xeon(TM) CPU 3.20GHz stepping 05

May 11 21:44:30 test1 kernel: Total of 4 processors activated (25480.39 BogoMIPS).

May 11 21:44:30 test1 kernel: cpu_sibling_map[0] = 1

May 11 21:44:30 test1 kernel: cpu_sibling_map[1] = 0

May 11 21:44:30 test1 kernel: cpu_sibling_map[2] = 3

May 11 21:44:30 test1 kernel: cpu_sibling_map[3] = 2

May 11 21:44:30 test1 kernel: ENABLING IO-APIC IRQs

May 11 21:44:30 test1 kernel: Setting 8 in the phys_id_present_map

May 11 21:44:30 test1 kernel: ...changing IO-APIC physical APIC ID to 8 ... ok.

May 11 21:44:30 test1 kernel: Setting 9 in the phys_id_present_map

May 11 21:44:30 test1 kernel: ...changing IO-APIC physical APIC ID to 9 ... ok.

May 11 21:44:30 test1 kernel: Setting 10 in the phys_id_present_map

May 11 21:44:30 test1 kernel: ...changing IO-APIC physical APIC ID to 10 ... ok.

May 11 21:44:30 test1 kernel: ..TIMER: vector=0x31 pin1=2 pin2=0

May 11 21:44:30 test1 kernel: testing the IO APIC.......................

May 11 21:44:30 test1 kernel:

May 11 21:44:30 test1 last message repeated 2 times

May 11 21:44:30 test1 kernel: .................................... done.

May 11 21:44:30 test1 kernel: Using local APIC timer interrupts.

May 11 21:44:30 test1 kernel: calibrating APIC timer ...

May 11 21:44:30 test1 kernel: ..... CPU clock speed is 3189.7124 MHz.

May 11 21:44:30 test1 kernel: ..... host bus clock speed is 132.9046 MHz.

May 11 21:44:30 test1 kernel: cpu: 0, clocks: 1329046, slice: 265809

May 11 21:44:30 test1 kernel: CPU0<T0:1329040,T1:1063216,D:15,S:265809,C:1329046>

May 11 21:44:30 test1 kernel: cpu: 1, clocks: 1329046, slice: 265809

May 11 21:44:30 test1 kernel: cpu: 3, clocks: 1329046, slice: 265809

May 11 21:44:30 test1 kernel: cpu: 2, clocks: 1329046, slice: 265809

May 11 21:44:30 test1 kernel: CPU1<T0:1329040,T1:797408,D:14,S:265809,C:1329046>

May 11 21:44:30 test1 kernel: CPU3<T0:1329040,T1:265792,D:12,S:265809,C:1329046>

May 11 21:44:30 test1 kernel: CPU2<T0:1329040,T1:531600,D:13,S:265809,C:1329046>

May 11 21:44:30 test1 kernel: checking TSC synchronization across CPUs: passed.

May 11 21:44:30 test1 kernel: Waiting on wait_init_idle (map = 0xe)

May 11 21:44:30 test1 kernel: All processors have done init_idle

May 11 21:44:30 test1 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfdb75, last bus=4

May 11 21:44:30 test1 kernel: PCI: Using configuration type 1

May 11 21:44:30 test1 kernel: PCI: Probing PCI hardware

May 11 21:44:30 test1 kernel: PCI: Probing PCI hardware (bus 00)

May 11 21:44:30 test1 kernel: PCI: Ignoring BAR0-3 of IDE controller 00:1f.1

May 11 21:44:30 test1 kernel: Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge

May 11 21:44:30 test1 kernel: PCI: Using IRQ router PIIX/ICH [8086/2480] at 00:1f.0

May 11 21:44:30 test1 kernel: PCI->APIC IRQ transform: (B0,I29,P0) -> 16

May 11 21:44:30 test1 kernel: PCI->APIC IRQ transform: (B0,I29,P1) -> 19

May 11 21:44:30 test1 kernel: PCI->APIC IRQ transform: (B0,I31,P0) -> 17

May 11 21:44:30 test1 kernel: PCI->APIC IRQ transform: (B0,I31,P1) -> 17

May 11 21:44:30 test1 kernel: PCI->APIC IRQ transform: (B4,I7,P0) -> 50

May 11 21:44:30 test1 kernel: PCI->APIC IRQ transform: (B4,I7,P1) -> 49

May 11 21:44:30 test1 kernel: PCI->APIC IRQ transform: (B3,I7,P0) -> 30

May 11 21:44:30 test1 kernel: PCI->APIC IRQ transform: (B3,I7,P1) -> 31

May 11 21:44:30 test1 kernel: PCI->APIC IRQ transform: (B3,I10,P0) -> 28

May 11 21:44:30 test1 kernel: PCI->APIC IRQ transform: (B1,I12,P0) -> 17

May 11 21:44:30 test1 kernel: Linux NET4.0 for Linux 2.4

May 11 21:44:30 test1 kernel: Based upon Swansea University Computer Society NET3.039

May 11 21:44:30 test1 kernel: Initializing RT netlink socket

May 11 21:44:30 test1 kernel: Starting kswapd

May 11 21:44:30 test1 kernel: allocated 32 pages and 32 bhs reserved for the highmem bounces

May 11 21:44:30 test1 kernel: Journalled Block Device driver loaded

May 11 21:44:30 test1 kernel: pty: 256 Unix98 ptys configured

May 11 21:44:30 test1 kernel: Real Time Clock Driver v1.10f

May 11 21:44:30 test1 kernel: loop: loaded (max 8 devices)

May 11 21:44:30 test1 kernel: Intel(R) PRO/1000 Network Driver - version 5.2.30.1-k1

May 11 21:44:30 test1 kernel: Copyright (c) 1999-2004 Intel Corporation.

May 11 21:44:30 test1 kernel: eth0: Intel(R) PRO/1000 Network Connection

May 11 21:44:30 test1 kernel: eth1: Intel(R) PRO/1000 Network Connection

May 11 21:44:30 test1 kernel: eth2: Intel(R) PRO/1000 Network Connection

May 11 21:44:30 test1 kernel: sk98lin: No adapter found.

May 11 21:44:30 test1 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4

May 11 21:44:30 test1 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

May 11 21:44:30 test1 kernel: ICH3: IDE controller at PCI slot 00:1f.1

May 11 21:44:30 test1 kernel: PCI: Enabling device 00:1f.1 (0005 -> 0007)

May 11 21:44:30 test1 kernel: ICH3: chipset revision 2

May 11 21:44:30 test1 kernel: ICH3: not 100%% native mode: will probe irqs later

May 11 21:44:30 test1 kernel: ide0: BM-DMA at 0x03a0-0x03a7, BIOS settings: hda:pio, hdb:pio

May 11 21:44:30 test1 kernel: ide1: BM-DMA at 0x03a8-0x03af, BIOS settings: hdc:DMA, hdd:pio

May 11 21:44:30 test1 kernel: hdc: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive

May 11 21:44:30 test1 kernel: hdc: Disabling (U)DMA for SAMSUNG CD-ROM SN-124

May 11 21:44:30 test1 kernel: ide1 at 0x170-0x177,0x376 on irq 15

May 11 21:44:30 test1 kernel: hdc: attached ide-cdrom driver.

May 11 21:44:30 test1 kernel: hdc: ATAPI 24X CD-ROM drive, 128kB Cache

May 11 21:44:30 test1 kernel: Uniform CD-ROM driver Revision: 3.12

May 11 21:44:30 test1 kernel: SCSI subsystem driver Revision: 1.00

May 11 21:44:30 test1 kernel: scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.10

May 11 21:44:30 test1 kernel: <Adaptec AIC7902 Ultra320 SCSI adapter>

May 11 21:44:30 test1 kernel: aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs

May 11 21:44:30 test1 kernel:

May 11 21:44:30 test1 kernel: scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.10

May 11 21:44:30 test1 kernel: <Adaptec AIC7902 Ultra320 SCSI adapter>

May 11 21:44:30 test1 kernel: aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs

May 11 21:44:30 test1 kernel:

May 11 21:44:30 test1 kernel: (scsi1:A:0): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)

May 11 21:44:30 test1 kernel: Vendor: SEAGATE Model: ST373453LC Rev: 0006

May 11 21:44:30 test1 kernel: Type: Direct-Access ANSI SCSI revision: 03

May 11 21:44:30 test1 kernel: Vendor: ESG-SHV Model: SCA HSBP M22 Rev: 0.06

May 11 21:44:30 test1 kernel: Type: Processor ANSI SCSI revision: 02

May 11 21:44:30 test1 kernel: scsi1:A:0:0: Tagged Queuing enabled. Depth 32

May 11 21:44:30 test1 kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0

May 11 21:44:30 test1 kernel: SCSI device sda: 143374744 512-byte hdwr sectors (73408 MB)

May 11 21:44:30 test1 kernel: Partition check:

May 11 21:44:30 test1 kernel: sda: sda1 sda2 sda3 sda4 < sda5 >

May 11 21:44:30 test1 kernel: NET4: Linux TCP/IP 1.0 for NET4.0

May 11 21:44:30 test1 kernel: IP Protocols: ICMP, UDP, TCP

May 11 21:44:30 test1 kernel: IP: routing cache hash table of 32768 buckets, 256Kbytes

May 11 21:44:30 test1 kernel: TCP: Hash tables configured (established 262144 bind 65536)

May 11 21:44:30 test1 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

May 11 21:44:30 test1 kernel: EXT3-fs: INFO: recovery required on readonly filesystem.

May 11 21:44:30 test1 kernel: EXT3-fs: write access will be enabled during recovery.

May 11 21:44:30 test1 kernel: kjournald starting. Commit interval 5 seconds

May 11 21:44:30 test1 kernel: EXT3-fs: sd(8,3): orphan cleanup on readonly fs

May 11 21:44:30 test1 kernel: EXT3-fs: sd(8,3): 8 orphan inodes deleted

May 11 21:44:30 test1 kernel: EXT3-fs: recovery complete.

May 11 21:44:30 test1 kernel: EXT3-fs: mounted filesystem with ordered data mode.

May 11 21:44:30 test1 kernel: VFS: Mounted root (ext3 filesystem) readonly.

May 11 21:44:30 test1 kernel: Freeing unused kernel memory: 280k freed

May 11 21:44:30 test1 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal

May 11 21:44:30 test1 kernel: Adding Swap: 4192924k swap-space (priority -1)

May 11 21:44:30 test1 kernel: kjournald starting. Commit interval 5 seconds

May 11 21:44:30 test1 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal

May 11 21:44:30 test1 kernel: EXT3-fs: mounted filesystem with ordered data mode.

May 11 21:44:30 test1 kernel: kjournald starting. Commit interval 5 seconds

May 11 21:44:30 test1 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal

May 11 21:44:30 test1 kernel: EXT3-fs: mounted filesystem with ordered data mode.

May 11 21:44:30 test1 kernel: e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex

May 11 21:44:30 test1 kernel: e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex

May 11 21:44:29 test1 network: Bringing up interface eth2: succeeded

May 11 21:44:32 test1 xinetd: xinetd startup succeeded

May 11 21:44:32 test1 vsftpd: true startup succeeded

May 11 21:44:32 test1 gpm: gpm startup succeeded

May 11 21:44:32 test1 gpm[986]: oops() invoked from gpm.c(978)

May 11 21:44:32 test1 gpm[986]: /dev/mouse: No such device

May 11 21:44:33 test1 crond: crond startup succeeded

  <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" />