늦둥이님/suki 님 감사~ 근데 하나 더..

답변 감사합니다.

해당 홈페이지 가서 드라이버 받고 시키는대로 했구요..

성공적으로 진행이 잘 된거 같은데...

fdisk -l

을 실행해도 디스크 4개가 다 따로 나오네요..

일단 메뉴얼 입니다.

======== 메뉴얼 시작 ===========

3.3 Adding / Updating the SAS Driver to an Existing Linux system
----------------------------------------------------------------

1  Install the DKMS rpm package if needed. Use this command
      > rpm -ivh <dkms rpm package name>
  
   NOTE: Use rpm -Uvh <package name> when updating an existing package.
  
2  Install the Driver package. Use this command
      > rpm -ivh <driver rpm package name>

3  Verify the driver has been loaded with this system command:
      > modinfo mptsas

   and this dkms commands:
      > dkms status

   The version shown in the output should match in both cases and
   with the version of the package.

========= 메뉴얼 끝============

3번의 output입니다.

=============== output 시작 ==============

[root@Raid-Test-eagon ~]# modinfo mptsas
filename:       /lib/modules/2.6.18-92.1.13.el5/kernel/drivers/message/fusion/mptsas.ko
version:        3.04.05
license:        GPL
description:    Fusion MPT SAS Host driver
author:         LSI Corporation
srcversion:     2518D4BD4DACEA3EC1EC912
alias:          pci:v00001000d00000062sv*sd*bc*sc*i*
alias:          pci:v00001000d00000058sv*sd*bc*sc*i*
alias:          pci:v00001000d00000056sv*sd*bc*sc*i*
alias:          pci:v00001000d00000054sv*sd*bc*sc*i*
alias:          pci:v00001000d00000050sv*sd*bc*sc*i*
depends:        mptscsih,mptbase,scsi_mod,scsi_transport_sas
vermagic:       2.6.18-92.1.13.el5 SMP mod_unload 686 REGPARM 4KSTACKS gcc-4.1
parm:           mpt_pt_clear: Clear persistency table: enable=1  (default=MPTSCSIH_PT_CLEAR=0) (int)
parm:           max_lun: max lun, default=16895  (int)
module_sig:     883f35048dad46020b65dca289aeef112bc109d17906c3eb0985bd2053fb8219242071a860e10a08f73d6489fe295708c5531ae68142d8b540080
[root@Raid-Test-eagon ~]# dkms status
mptlinux, 4.00.07.00: added

============ output 끝 ===========

그리고 나서 fdisk -l 의 output 입니다.

===========output 시작 ==========

[root@Raid-Test-eagon ~]# fdisk -l

Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1        9206    73947163+  83  Linux
/dev/sda2            9207        9728     4192965   82  Linux swap / Solaris

Disk /dev/sdb: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System

Disk /dev/sdc: 250.0 GB, 250000000000 bytes
255 heads, 63 sectors/track, 30394 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System

Disk /dev/sdd: 250.0 GB, 250000000000 bytes
255 heads, 63 sectors/track, 30394 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System

================ output 끝 ====================

뭘 덜 한걸까요?

도와주시면 감사합니다.