서버　하드가　부팅이　안될경우　

레드햇　９．０　을　사용하고있습니다．

오늘　아침에　서버가　맛이　갔습니다．

그래서　재　기동을　하면，　ｇｒｕｂ화면까지는　나오는데

그다음에　하드디스크　체크를　계속　하는　도중에　멈추어　버립니다．

그래서　레드핫　시디를　통해　응급모드로　해봤지만．．응급모드에　들어간　후에　언어설정，네트워크　설중후　다음을　누루면　파란　화면과　함께　먹통이　되어　버렸습니다．

그래서　

라이브　시디를　통해　복구　작업을　해봤지만，시디로　부팅후　로그인　화면이　나오는데　거기서도　하드시디스크　체크를　하더니　도중에　먹통이　되어　버렸습니다．．

혹시나　해서　마지막으로　기동이　안되는　불량하드를　다른서버에　붙어서　기동을　하면

[root@koni home]# dmesg  | more
59536652
end_request: I/O error, dev 16:47 (hdd), sector 59536654
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
Adding Swap: 2048248k swap-space (priority -1)
end_request: I/O error, dev 16:41 (hdd), sector 208640
end_request: I/O error, dev 16:41 (hdd), sector 208642
end_request: I/O error, dev 16:41 (hdd), sector 208644
end_request: I/O error, dev 16:41 (hdd), sector 208646
end_request: I/O error, dev 16:41 (hdd), sector 208648
end_request: I/O error, dev 16:41 (hdd), sector 208650
end_request: I/O error, dev 16:41 (hdd), sector 208652
end_request: I/O error, dev 16:41 (hdd), sector 208654
end_request: I/O error, dev 16:42 (hdd), sector 10233216

이런씩으로　섹터에러가　엄청　나오네요．．아마도　불량하드가　ｈｄｄ로　인식하는것　같은데요．．

어떻게　　기동은　되는데　불량하드를　마운트　시키려고　하면

마운트가　되지　않습니다．．

이　하드의　ｄｂ데이타　만이라도　살려　볼려고　하는데．．어떻게　부팅안될까요．．

그리고．．　하나　여쭈어　싶은데요．

기존에　움직이는　리눅스　서버의　파티션이　나누어진　하드를　

다른　리눅스　서버에　마운트　시키는　작업이　어떻게　해야하는지요．．

예를　들어서．．　ｈｄｄ１（ｒｏｏｔ），ｈｄｄ２（ｂｏｏｔ）　，　ｈｄｄ３（ｈｏｍｅ）이런씩으로　파티션이　나누어진　하드를　　　　다른　서버에서　마운트　시킬때　

$ mount -t ext3 /dev/hdd1 /home/hdd1

이런씩으로　하면　보통　마운트　시킬수　있는지요．．

고수님들의　작은　조언　부탁드립니다．．．．

좋은　하루되세요